"In phase I, the offeror shall identify specific research approaches for an embedded ASoSC2 prognostics capability utilizing notional predominant failure modes as determined by the offeror for ASoSC2 radar sensors components, particularly networking and communications."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - June 10, 2008
N08-197 Renumbered to N08-198
N08-198 Renumbered to N08-199
N08-199 Renumbered to N08-200
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - May 22, 2008
"Develop and demonstrate low cost freeze casting or similar approach to make a spinel or ALON sintered body 7” dome (7” diameter hemisphere, 160 degree aperture) that will exhibit, at a minimum, 84% transmission at 4.5 microns, 80% transmission at 0.7 microns, have a thickness of 0.180 inches."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - May 21, 2008
Please refer to the online version of the solicitation at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - May 16, 2008
"New adhesive formulations must provide a continuous service temperature from -65ºF to 285ºF for up to 1,000 hours while maintaining a 2 to 8 lb/in width peel strength (as measured by the 180º peel adhesion test method)."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - May 15, 2008
Please refer to the online version of the solicitation at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - May 7, 2008
Please refer to the online version of the solicitation at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - May 2, 2008
"Develop concepts for a software/hardware camera system to acquire three-dimensional quantitative deformation data from impact and blast events with image resolutions of at least 300 x 200 pixels at framing rates of 1 MHz or higher."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - April 29, 2008
"At the end of Phase II, the final prototype with documentation of the design and the user manual shall be delivered to the Army research engineers at APG for evaluation and validation under ballistic impact and blast loading conditions, at the outdoor gun and blast ranges at APG."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - April 29, 2008
"Research the latest state of the art technology (both hardware and software) in computer graphics to aid in the development of technology required to implement realistic, high-fidelity dynamic terrain into a visual simulation environment to improve the realism of the soldier-machine/terrain interface, thereby improving the reliability of modeling and simulation and enhancing the accuracy of the model's predictions."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - April 25, 2008
"In many cases (e.g., airfoils) CMCs' interlaminar properties can be a design criterion/limit rather than a 'superior' in-plane property".
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - April 25, 2008
"MIL-HDBK-15-5" has been corrected to read as "MIL-HDBK-17-5."
Please refer to the online version of this topic at http://www.dodsbir.net/solicitation/sbir082/default.htm.
Posted - April 25, 2008
Posted - April 25, 2008
Posted - April 24, 2008
Posted - April 23, 2008
Posted - April 23, 2008
Posted - April 23, 2008
Posted - April 23, 2008
Posted - April 23, 2008
Posted - April 23, 2008
Posted - April 21, 2008